Triple Output DC Power Supply - EDU36311A
Overview
The EDU36311A triple-output power supply has a compact design to fit anywhere on your bench. Monitor all your outputs simultaneously from any angle with its 7-inch color display. Each output is independent — connect your outputs in a series for higher voltage, in parallel for additional current, or stack to provide 0 to ±30 V. A sequencing feature enables and disables outputs in a set pattern. You can now activate the control logic before applying power to the rest of your device.
Technical Details
Number of Outputs: 3 independent
Channel 1: 0 - 6V, 5A
Channel 2: 0 - 30V, 1A
Channel 3: 0 - 30V, 1A
Total Power: 90 W
Ripple and Noise: <1 mVrms
Accuracy: 0.05% +10 mV
Training Materials
Useful Links
Access & Hazard Information
Standard AccessMembers are allowed to use this equipment. Access rules are defined by the equipment’s hazard class. Read the hazard class descriptions.
Hazard Class 1- Hazards: Minor injuries that can be resolved with first aid kit or ice pack
- Power: Less than 0.25 HP, 2-4 amps, 120 VAC or up to 18V DC
- Examples: Lower power hand tools and small bench tools. Drills, glue guns, soldering tools, heat guns, 3D printers, 3D scanner
- Access Requirements: Members must attend a training session and pass written and hands-on exams. Improper use will be punished with a verbal warning.
- Supervision Requirements: The Makerspace must be open and a makerspace staff member must be present in the facility.