Triple Output DC Power Supply

Makerspace

E3630A
Manufacturer: Keysight
Quantity: 1
Location: Main Floor Prototyping Area
Category: Electronics
Operational *
Hazard Class 1
Standard Access
*Equipment has not been setup and commissioned. Planned to be available by November 2018.

Overview

Standard benchtop triple output DC power supply.

Technical Details

Output ratings (Maximum current is derated 3.3% per °C from 40°C to 55°C)
- Output 1: 0 to 6 V, 0 to 2.5 A
- Output 2: 0 to +20 V, 0 to 0.5 A
- Output 3: 0 to -20 V, 0 to 0.5 A
- Power (max): 35 W

Ripple & noise from 20 Hz to 20 MHz
- Normal Mode Voltage rms: 350 µV
- Peak-to-Peak: 1.5 mV

Useful Links

Access & Hazard Information

Standard Access

Members are allowed to use this equipment. Access rules are defined by the equipment’s hazard class. Read the hazard class descriptions.

Hazard Class 1

  1. Hazards: Minor injuries that can be resolved with first aid kit or ice pack
  2. Power: Less than 0.25 HP, 2-4 amps, 120 VAC or up to 18V DC
  3. Examples: Lower power hand tools and small bench tools. Drills, glue guns, soldering tools, heat guns, 3D printers, 3D scanner
  4. Access Requirements: Members must attend a training session and pass written and hands-on exams. Improper use will be punished with a verbal warning.
  5. Supervision Requirements: The Makerspace must be open and a makerspace staff member must be present in the facility.