LH 120/13 Electrically Heated Furnace
Overview
A fast-firing furnaces ideal for simulation of typical fast-firing processes up to a maximum firing temperature of 1300 °C. The combination of high performance, low thermal mass and powerful cooling fans provides for cycle times from cold to cold up to 35 minutes with an opening temperature of approx. 300 °C
Technical Details
Max Temperature: 1300 °C
Interior Dimensions: 500mm x 500mm x 500mm
Floor and lid heating
Two-zone control, bottom and lid
Integrated cooling fans, programmable to speed up charge cooling including housing cooling
Programmable lid opening of approximately 20 mm for faster cooling without activating the fan
Thermocouple PtRh-Pt, type S for top and bottom zone
Useful Links
Access & Hazard Information
Assisted Use OnlyMembers are allowed to use this equipment only with dedicated assistance or supervision from a makerspace staff member.
Hazard Class 4- Hazards: As above, but potential for serious amputations and life-threatening injuries
- Power: As above, but self-standing and 3 phase power
- Examples: Powder actuated tools, table saws, manual mills and lathes
- Access Requirements: Members must attend a training session and pass written and hands-on exams. Improper use will be punished with a verbal warning, a note in the members file, mandatory retraining, and potiential loss of access to the space..
- Supervision Requirements: The Makerspace must be open and a dedicated staff member must supervise use of this equipment for the entirety of its operation. Staff may deny access or place additional restrictions on use of this equipment on a per-use or per-person basis.