DS-30Y CNC Lathe
Overview
The DS-30Y Y-axis turning center combines dual-spindle turning with Y axis, C axis, and live tooling to create a powerful “done-in-one” machining solution for any shop. Off-center milling, drilling, and tapping operations are possible for increased machining capabilities. It comes standard with a 12-station BMT65 turret and synchronized C axis for versatile 4-axis capability. The opposed spindles support fully synchronized turning, and allow on-the-fly part pass-off to reduce cycle times.
Technical Details
Primary Spindle: 30 HP, 8,100 RPM with C-Axis
Secondary Spindle: 20 HP, 8,100 RPM
Turret: 12-Station BMT65 with 6,000 RPM Live Tooling
Features: Rigid Tapping, Spindle Orientaton
Primary Chuck: 8"
Secondary Chuck: 8"
Useful Links
Access & Hazard Information
Staff Use OnlyUse of this equipment is reserved for Makerspace staff members only. If a project of yours requires the use of this equipment, speak with a Makerspace staff member.
Hazard Class 4- Hazards: As above, but potential for serious amputations and life-threatening injuries
- Power: As above, but self-standing and 3 phase power
- Examples: Powder actuated tools, table saws, manual mills and lathes
- Access Requirements: Members must attend a training session and pass written and hands-on exams. Improper use will be punished with a verbal warning, a note in the members file, mandatory retraining, and potiential loss of access to the space..
- Supervision Requirements: The Makerspace must be open and a dedicated staff member must supervise use of this equipment for the entirety of its operation. Staff may deny access or place additional restrictions on use of this equipment on a per-use or per-person basis.