Combination Sander
Manufacturer: Jet
Quantity: 1
Location:
Fundamental Machining Lab
Temporarily Unavailable
*
*Equipment has not been setup and commissioned. Planned to be available by November 2018.
Overview
Belt and disc combination sander for gradual removal of material. Best used on metals.
Technical Details
Belt Length: 48"
Belt Width: 6"
Disc Diameter: 12
Power: 1-1/2 HP
Belt Orientation: Vertical
Belt Speed: 2850.00 ft/min
Wet/Dry Compatibility: Dry
Disc Speed: 1960 RPM
Table Length: 14-3/4" (Belt); 16-3/8" (Disc)
Table Width: 12" (Disc); 7-3/8" (Belt)
Inward Table Tilt: 20 Degrees
Outward Table Tilt: 45 Degrees
Useful Links
Access & Hazard Information
Standard AccessMembers are allowed to use this equipment. Access rules are defined by the equipment’s hazard class. Read the hazard class descriptions.
Hazard Class 3- Hazards: Minor injuries that can be resolved with first aid kit or ice pack, but potential for serious lacerations and minor amputations that require medical attention
- Power: Greater than 0.5 HP, greater than 10-amp, 120 VAC, greater than 24V DC
- Examples: Powerful portable tools and light industrial tools. 3D printers/processes with toxic/corrosive wash steps, CNC interlocked/enclosed mill, lathe, waterjet
- Access Requirements: Members must attend a training session and pass written and hands-on exams. Improper use will be punished with a verbal warning, a note in the members file, mandatory retraining, and potiential loss of access to the space.
- Supervision Requirements: The Makerspace must be open and a makerspace staff member must approve use of the equipment each time it is used. Staff may deny access or place additional restrictions on the use of this equipment on a per-use or per-person basis.