Belt Grinding and Polishing Machine

Makerspace

Bader Space Saver
Manufacturer: Stephen Bader
Quantity: 1
Location: Fundamental Machining Lab
Category: Post Processing
Temporarily Unavailable *
Hazard Class 4
Assisted Use Only
*Equipment has not been setup and commissioned. Planned to be available by November 2018.

Overview

Whether you’re hogging off material quickly with a coarse grit belt or putting a fine finish on jet blades, surgical implements, or hand tools, the Bader Space Saver is built with speed and versatility in mind. Change the contact wheel or attachments to process any part quickly and efficiently. It easily pivots on its base, raises to standing height or lowers to your chair.

Technical Details

 

Power 7.5 HP
Belt speeds 1500-9000 SFPM
Contact wheel diameter 9/16” to 18”
Contact wheel width 3”
Belt width 1/4” to 3”
Belt length 132"

Useful Links

Access & Hazard Information

Assisted Use Only

Members are allowed to use this equipment only with dedicated assistance or supervision from a makerspace staff member.

Hazard Class 4

  1. Hazards: As above, but potential for serious amputations and life-threatening injuries
  2. Power: As above, but self-standing and 3 phase power
  3. Examples: Powder actuated tools, table saws, manual mills and lathes
  4. Access Requirements: Members must attend a training session and pass written and hands-on exams. Improper use will be punished with a verbal warning, a note in the members file, mandatory retraining, and potiential loss of access to the space..
  5. Supervision Requirements: The Makerspace must be open and a dedicated staff member must supervise use of this equipment for the entirety of its operation. Staff may deny access or place additional restrictions on use of this equipment on a per-use or per-person basis.