VF-4 CNC Mill

Makerspace

Manufacturer: Haas Automation
Quantity: 1
Location: Main Floor CNC Area
Category: CNC Machining
Operational
Hazard Class 4
Staff Use Only

Overview

High performance vertical machining center with 4th axis rotarty capability designed for large work pieces and complicated geometry.

Technical Details

Spindle: 30 HP, CAT-40, 15,000 RPM, 90 ft-lbf @ 2000 rpmTable: 52.0" x 18.0" (XY)Max Weight on Table (evenly distributed): 3500 lbMax Cutting Soeed: 650 ipmRapids: 1,200 ipmTool Changer: 40+1 Side MountOption: Through Spindle Coolant up to 1000 PSI, Through Tool Air BlastProbing: Work Offset and Tool OffestRotary:HRC-210

Useful Links

Access & Hazard Information

Staff Use Only

Use of this equipment is reserved for Makerspace staff members only. If a project of yours requires the use of this equipment, speak with a Makerspace staff member.

Hazard Class 4

  1. Hazards: As above, but potential for serious amputations and life-threatening injuries
  2. Power: As above, but self-standing and 3 phase power
  3. Examples: Powder actuated tools, table saws, manual mills and lathes
  4. Access Requirements: Members must attend a training session and pass written and hands-on exams. Improper use will be punished with a verbal warning, a note in the members file, mandatory retraining, and potiential loss of access to the space..
  5. Supervision Requirements: The Makerspace must be open and a dedicated staff member must supervise use of this equipment for the entirety of its operation. Staff may deny access or place additional restrictions on use of this equipment on a per-use or per-person basis.