8'' Jointer w/Helical Cutterhead

Makerspace

Manufacturer: Powermatic
Quantity: 1
Location: Woodshop
Category: Wood
Temporarily Unavailable
Hazard Class 4
Assisted Use Only

Overview

This 8-inch jointer meets the demand for accuracy while combining unique, user-friendly functions. The infeed table lever can be used to rapidly position table height, then the handle rotated for fine-adjustment of cut depth. Fence tilting is accomplished by a worm gear system, smoothly operated by a simple handwheel. The tables provide 73" long extended support. A non-mar insert in the fence protects the table from scratches during adjustments. The jointer is available with a three knife cutterhead, or a helical cutterhead with four-sided knife inserts. The operating switch is high mounted for easy reach, and the push blocks have a magnetic base - store them on any metallic surface for instant access.

Technical Details

Type of Cutterhead: Helical
Number of Knives: 54 Four-Sided Carbide Helical Inserts
Cutterhead Diameter (In.): 3"
Cutterhead Speed (RPM): 7,000
Cutting Capacity (W x D) (In.): 8" x 1/2"
Table Size (L x W) (In.): 73 x 8-1/2"
Table Height from Floor (In.): 32"
Infeed Table Length (In.): 35-1/4"
Outfeed Table Length (In.): 35-1/2"
Rabbeting Capacity (In.): NA
Rabbeting Ledge (In.): 1/2"
Fence Size (L x H) (In.): 38" x 4-3/4"
Fence Tilt (Deg.): 45 Forward, 45 Backward
Fence Positive Stops (Deg.): 45, 90, -45
Motor Power (HP): 2 HP

Useful Links

Access & Hazard Information

Assisted Use Only

Members are allowed to use this equipment only with dedicated assistance or supervision from a makerspace staff member.

Hazard Class 4

  1. Hazards: As above, but potential for serious amputations and life-threatening injuries
  2. Power: As above, but self-standing and 3 phase power
  3. Examples: Powder actuated tools, table saws, manual mills and lathes
  4. Access Requirements: Members must attend a training session and pass written and hands-on exams. Improper use will be punished with a verbal warning, a note in the members file, mandatory retraining, and potiential loss of access to the space..
  5. Supervision Requirements: The Makerspace must be open and a dedicated staff member must supervise use of this equipment for the entirety of its operation. Staff may deny access or place additional restrictions on use of this equipment on a per-use or per-person basis.