NextEngine 3D Scanner Ultra HD

Makerspace

NextEngine
Manufacturer: Shape Tools
Quantity: 2
Location: Metrology Lab
Categories: 3D Scanning Metrology
Service Advisory *
Hazard Class 1
Assisted Use Only
*Resultant 3D scan is only editable on the mesh level. Dimensions of scans cannot yet be edited until new software is purchased.

Overview

NextEngine delivers an unprecedented combination of power and affordability. With an accuracy of 0.005" inch, it rivals systems costing 10 times the price. 

Technical Details

Object Size: No preset limit. Objects larger than field can be assembled with supplied software.
Field Size: 5.1" x 3.8" (Macro) and 13.5" x 10.1" (Wide). ProScan Extended Mode 22.5” x 16.75”.
Capture Density: On target surface capture up to 268K points/in²(Marco), 29K points/in² (Wide).
Texture Density: 500 DPI on target surfaces is 500 DPI in Macro Mode and 200 DPI in Wide Mode.
Dimensional Accuracy: ±0.005" in Macro Mode and ±0.015" in Wide Mode.
Acquisition Speed: 50,000 processed points/sec throughput. Typically 2 minutes per scan of each facet.
Typical Datasets: Typical small models are a quarter million points, after oversampling and optimization
Environmental: Desktop use under ordinary office lighting. No darkroom or special background required.
Measurement System: NextEngine proprietary MultiStripe Laser Triangulation (MLT) technology. Patents Pending.
Source: Twin arrays of four, Class 1M, 10 mW solid state lasers with custom optics 650 nm λ.
Sensor: Twin 5.0 Megapixel CMOS image sensors.
Photo Surface: Optically synchronous 7-color surface capture for precision-locked geomtry correlation.
Photo Lighting: Built-in spatially diverse whitelight illuminators with tri-phosphor, wide color gamut.

Useful Links

Access & Hazard Information

Assisted Use Only

Members are allowed to use this equipment only with dedicated assistance or supervision from a makerspace staff member.

Hazard Class 1

  1. Hazards: Minor injuries that can be resolved with first aid kit or ice pack
  2. Power: Less than 0.25 HP, 2-4 amps, 120 VAC or up to 18V DC
  3. Examples: Lower power hand tools and small bench tools. Drills, glue guns, soldering tools, heat guns, 3D printers, 3D scanner
  4. Access Requirements: Members must attend a training session and pass written and hands-on exams. Improper use will be punished with a verbal warning.
  5. Supervision Requirements: The Makerspace must be open and a makerspace staff member must be present in the facility.